Skip to main content
ABC Cutting Contractors of Jacksonville, Inc.

Notable Concrete Cutting Projects

Thousands of jobs across Northeast Florida since 1986, including some of the region's best-known structures.

Our work

Clips and photos from ABC jobs: core holes, hatch openings, wire sawing and wall openings.

  • Cutting a square opening on a rooftop with a concrete chainsaw.
  • Core drilling a large hole in a brick wall from an aerial lift.
  • A core drilling rig set up against a concrete wall.
  • Lifting a cut section of sewer pipe.
  • Cutting scupper openings in a wall.
  • Flush cut and controlled wall drop.
  • Wire sawing a sewer pipe in tight quarters.
  • Lifting out the last cut slab section.
  • Cutting through rebar found in the slab.
  • Saw-cut trenches for plumbing.
  • ABC crew member running a large-diameter core drill through the wall of a precast concrete manhole structure
    Core drilling a large opening through a precast manhole.
  • Saw-cut block of a thick concrete lid being lifted by crane, leaving a square hatch opening
    Hatch opening: the saw-cut section lifted out by crane.
  • Diamond wire saw clamped to a large steel pipe, with the cut line running through the pipe wall
    A wire saw cutting through a large steel pipe.
  • ABC crew on an aerial lift beside a large saw-cut section of an interior concrete wall being removed
    Removing a large wall opening.
  • Concrete core drilled out by ABC showing heavy steel reinforcing bars cut cleanly through its length
    A core drilled through heavy steel.
  • Precast concrete box after an ABC wire saw job, with the large pipe opening exposed in an excavation
    A completed wire saw job on a precast box.
  • Row of new doorway openings saw-cut through a concrete wall along a building corridor
    A row of doorway openings cut along a corridor.
  • Square hatch opening saw-cut through a 16-inch-thick concrete lid
    A hatch opening through a 16-inch-thick lid.
  • ABC operator guiding an electric walk-behind slab saw across an interior concrete floor
    An electric slab saw cutting an interior floor.
  • ABC operator using a concrete chainsaw on the corners of a square opening cut in a concrete deck
    Chain saw corners on a deck opening.
  • ABC crew member on an aerial lift cutting scupper openings in a building's exterior wall with a concrete chainsaw
    Scupper openings cut with a chainsaw.
  • Long interior bay of a car wash after demolition, with the floor removed down to soil
    Car wash demolition.

Notable projects

  • Stadium

    Gator Bowl renovation into Jacksonville's NFL stadium

    About $1 million in concrete cutting work. ABC handled concrete cutting and coring during the renovation that turned the Gator Bowl into Jacksonville's NFL stadium.

  • Utilities

    Water and wastewater treatment plants

    Large-diameter coring and structural cutting at treatment plants, including a 36-inch core through a 3-foot wall. Core drilling, wall sawing and wire sawing open or remove sections of thick, reinforced walls that often have to stay in service.

  • Data center

    AT&T data center conversion

    Concrete cutting for the conversion of a building into an AT&T data center. New power, cooling and cable routes through an existing structure meant core holes, trenches and openings that had to be clean and precise.

  • Aviation

    Jacksonville International Airport

    Concrete cutting at Jacksonville International Airport. Airport work runs on tight schedules inside secured, operating facilities, where a cutting crew has to show up on time, work clean and get out of the way.

  • Education

    University of North Florida

    Concrete cutting on the University of North Florida campus. Campus buildings are occupied most of the year, so the cutting is scheduled around the people using them.

Big jobs, small jobs, same crew

The crew that works stadiums, plants and airports also takes single core holes, short trenches and one-off openings for plumbers, electricians and homeowners. Every job gets the same care: show up, do it right, get out of the way.

Have a project that needs cutting?

Call (904) 246-1656 and tell us what needs cutting, where, and when.

Call (904) 246-1656Or request a quote online